Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1478002.png)
5. Remove the inner plenum base.
6. CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.
Position an absorbent cloth to collect fluid spillage.
7. CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug
any open connections to prevent contamination.
Disconnect 2 brake tubes from the ABS module.
All vehicles
8. Remove the 2 brake tubes from the master cylinder.
9. Disconnect the low brake fluid warning indicator switch electrical connector.
10. Disconnect the brake booster vacuum hose from the brake booster.
11. Remove the brake master cylinder.
^
Remove the 2 nuts.
12. Remove the brake booster.
^
Remove the 4 nuts.
Installation
All vehicles
