Range Rover Sport (LS) V8-4.4L (2009)
Installation
1. Install the bracket.
2. Install the coolant low level sensor.
3. Install the coolant expansion tank.
^
Connect the coolant low level sensor electrical connector.
4. Connect the coolant hoses to the expansion tank.
^
Secure with the clips.
5. Top-up the coolant.
^
Loosen the coolant expansion tank bleed screw.
^
Fill the coolant expansion tank until coolant emerges from the cooling system air bleed screw.
^
Remove the hose clamps.
^
Tighten the bleed screw to 8 Nm (6 ft. lbs.).
6. Secure the coolant expansion tank.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
7. Check and top-up the coolant.
^
Install the coolant expansion tank pressure cap.
8. Secure the power steering fluid reservoir.
^
Attach to the mounting bracket.
9. Secure the windshield washer reservoir filler neck.
^
Locate in clip.
10. Install the LH headlamp assembly.