Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-590008.png)
Install the special tool to the exhaust camshaft sprocket.
^
Tighten the intake camshaft sprocket retaining bolt to 120 Nm (88 ft. lbs.).
^
Tighten the exhaust camshaft retaining bolt to 120 Nm (88 ft. lbs.).
27. Install the RH VCT oil control unit.
^
Install the new O-ring seals. Tighten the new bolts to 22 Nm (16 ft. lbs.).
28. Remove the special tool from the LH cylinder head.
29. Remove the special tool from the RH cylinder head.
30. Remove the crankshaft locking tool.
^
Remove the screw.
31. Install the CKP sensor.
32. NOTE: Before installing the valve covers, check the valve clearances.
Install the engine front cover.
33. Install the battery tray.
