landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Cylinder Block Cradle|Removal|Page 1762 > < Cylinder Block Cradle|Removal|Page 1760
Page 5
background image

22. Disconnect the RH ignition coil-on-plug electrical connector.

23. Remove the RH ignition coil-on-plug.

^

Remove the bolt.

^

Remove and discard the seal.

24. Remove the remaining RH ignition coil on plugs.

25. Disconnect the positive crankcase ventilation (PCV) line.

26. Release the engine wiring harness from the retaining bracket.

27. Disconnect the RH variable camshaft timing (VCT) oil solenoid electrical connector.

NOTE: Note the fitted position of the retaining bolts prior to removal.

28. Remove the RH valve cover.

^

Remove the 14 valve cover retaining bolts.

^

Remove the engine cover bracket.

Cylinder Block Cradle|Removal|Page 1762 > < Cylinder Block Cradle|Removal|Page 1760