Range Rover Sport (LS) V8-4.4L (2009)
7. Remove the oil cooler.
Installation
1. NOTE: Fill the cooler with coolant to eliminate the air, prior to connecting the coolant hoses.
To install, reverse the removal procedure.
^
Tighten the adapter to 60 Nm (44 ft. lbs.)
^
Lubricate the oil filter seal with clean engine oil and tighten to 18 Nm (13 ft. lbs.).
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
2. Check and top up the engine oil.
3. Top up and bleed the coolant.