Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-655002.png)
1. CAUTION: Do not lubricate the components.
Partially install the crankshaft rear oil seal.
^
Make sure the components are clean and dry.
^
Carefully remove the transit sleeve, leaving the seal on the crankshaft.
2. CAUTION: Make sure the seal is installed parallel
Using the special tool, install the crankshaft rear oil seal.
^
Tighten the special tool nuts evenly and progressively to fully install the seal.
3. Install the torque converter flexplate.
