Range Rover Sport (LS) V8-4.4L (2009)
Variable Valve Timing Solenoid: Service and Repair
Variable Camshaft Timing (VCT) Oil Control Solenoid
Service Repair No - 12.30.60
Removal
NOTE: Removal of the RH is similar to this procedure.
1. Disconnect the battery ground cable.
2. Remove the valve cover.
3. Remove the variable camshaft timing (VCT) oil control solenoid.
^
Remove the bolt.
CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug
any open connections to prevent contamination.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Tighten the bolt to 10 Nm (7 ft. lbs.).