Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-727001.png)
Exhaust Pipe: Service and Repair
Tailpipe
Service Repair No - 30.10.22
Special Service Tools
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the tail pipe.
^
Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.
^
Disconnect from the exhaust hanger.
Installation
1. NOTE: Do not tighten the retaining clamp at this stage.
Install the tail pipe.
^
Clean the components.
^
Install the retaining clamp.
2. Align the tail pipe and tighten the retaining clamp to 55 Nm (40 ft. lbs.).
