landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6337 > < Diagram Information and Instructions|Page 6335
Page 1
background image

Compressor HVAC: Service and Repair

Air Conditioning (A/C) Compressor 

Service Repair No - 82.10.20

Removal

1. Disconnect the battery ground cable.        
2. Recover the A/C refrigerant.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

3. Raise and support the vehicle.        
4. Remove the front wheel.        
5. Remove the fender splash shield.        
6. Remove the splash shield.

^

Remove the 4 screws.

        

7. Remove the power steering pump.        
8. Release the transmission cooler pipe clips.        
9. Remove the power steering pump mounting bracket.

^

Remove the 3 bolts.

        

10. Remove the engine compartment LH upper heat shield.

CAUTION: Always plug any open connections to prevent contamination.

11. Disconnect the refrigerant lines from the A/C compressor.

^

Remove the 2 bolts.

^

Remove and discard the O-ring seal.

Diagram Information and Instructions|Page 6337 > < Diagram Information and Instructions|Page 6335