Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1895003.png)
17. Release the heater housing from the instrument panel carrier.
^
Remove the 7 Torx screws.
18. Remove the plenum chamber panel
19. Remove the instrument panel carrier to bulkhead Torx bolt.
20. With assistance, remove the instrument panel.
^
Remove the 6 Torx bolts.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
21. Disconnect 2 heater hoses from the bulkhead.
^
Release the 2 clips.
22. Release 2 A/C lines from the body.
^
Remove the nut.
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.
23. Release 2 A/C lines from the bulkhead.
^
Remove the bolt.
^
Remove and discard the O-ring seals.
