Range Rover Sport (LS) V8-4.4L (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
Air Conditioning (A/C) Pressure Transducer
Service Repair No - 82.20.38
Removal
1. Disconnect the battery ground cable.
2. Recover the A/C refrigerant.
CAUTION:
^
Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
^
To prevent damage to components, use an additional wrench when loosening or tightening unions.
3. Remove the A/C pressure transducer.
^
Disconnect the electrical connector.
^
Remove and discard the seal.
Installation
1. Install the A/C pressure transducer.
^
Clean the component mating faces.
^
Install a new seal.
^
Tighten the transducer to 10 Nm (7 lb.ft).
^
Connect the electrical connector.
2. Recharge the A/C system.
3. Connect the battery ground cable.