Land Rover Workshop Service and Repair Manuals

Brake Lamp: Service and Repair

Rear Lamp Assembly 

Service Repair No - 86.40.70

Removal

1. Open the liftgate.
2. Release the rear lamp assembly.

^

Remove the 2 screws.

^

Release the 2 clips.

3. Remove the rear lamp assembly.

^

Disconnect the electrical connector.

NOTE:
^

Do not disassemble further if the component is removed for access only.

^

Note the fitted position.

4. Remove the wiring harness.

^

Release the 5 bulb holders.

^

Release the electrical connector.

5. Remove the 5 bulbs.

Installation

1. Install the bulbs.
2. Install the wiring harness.

^

Install the bulb holders.

^

Install the electrical connector.

3. Install the rear lamp assembly.

^

Connect and secure the electrical connector.