Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-971001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor
Service Repair No - 18.30.10
Removal
1. Disconnect the battery ground cable.
2. Remove the throttle body.
3. Remove the ECT sensor.
^
Position the engine gas recirculation (EGR) coolant hose aside for access.
^
Position an absorbent cloth to collect fluid spillage.
^
Disconnect the electrical connector.
^
Remove the sensor and discard the seal.
Installation
1. To install, reverse the removal procedure.
^
Clean the components.
2. Tighten the ECT sensor to 18 Nm (13 ft. lbs.).
3. Top-up the coolant.
