landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Electrical - Parasitic Battery Draw|Page 204 > < Module-Blower-Motor Control-Front|Page 194
Page 1
background image

Instrument Panel Control Module: All Technical Service Bulletins
Electrical - Parasitic Battery Draw

No: LTB00215

Issue: 3

Date: 09 APR 2010

ISSUE '3' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND AND ASTERISKS

SECTION: 413

Instrument Cluster Causing Battery Drain

AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:
An issue has been identified where the vehicle battery may be drained without apparent reason. This may be due to the instrument cluster causing a 1.2
Amp drain on the battery and not allowing the vehicle to go into 'sleep mode'.

Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to measure the battery drain and, if necessary, reconfigure
the instrument cluster control module.

PARTS:

No parts necessary

TOOLS:

* IDS with latest DVD and Calibration Files; first available on IDS-DVD117 Patch File 11*

Land Rover-approved Midtronics Vehicle Power Supply

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

DISCHARGE TEST FOR INSTRUMENT CLUSTER

1. Refer to Battery Care Manual section Quiescent Current Testing and connect suitable current measuring equipment to the vehicle and select 'Amps'

from the range.

Electrical - Parasitic Battery Draw|Page 204 > < Module-Blower-Motor Control-Front|Page 194