landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Relays and Modules - Transfer Case > < Drivetrain - MIL ON/DTC P186D Stored|Page 478
Page 1
background image

Control Unit: Service and Repair

Differential Locking Module

Service Repair No - 51.30.01 

Removal 

1. Disconnect the battery ground cable.
2. Remove the rear quarter trim panel.
3. Release the parking aid module.

^

Remove the 2 nuts.

4. Remove the differential locking module.

^

Disconnect the 3 electrical connectors.

^

Remove the 3 bolts.

Installation 

1. Install the differential locking module.

^

Install the bolts and tighten to 10 Nm (7 lb.ft). 

^

Connect and secure the electrical connectors.

2. Install the parking aid module.

^

Tighten the nuts to 10 Nm (7 lb.ft). 

3. Install the rear quarter trim panel.
4. Connect the battery ground cable.
5. Use T4 to calibrate a new differential locking module.

Relays and Modules - Transfer Case > < Drivetrain - MIL ON/DTC P186D Stored|Page 478