Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-398001.png)
Ignition Switch: Service and Repair
Ignition Switch
Ignition Switch
Service Repair No - 86.65.02
Removal
1. Fully extend the steering column for access.
2. Remove the steering column upper shroud.
^
Release the 6 clips.
3. Remove the steering column lower shroud.
^
Remove the 3 Torx screws.
^
Disconnect the electrical connector.
4. CAUTION: The ignition key must be removed prior to the removal of the ignition switch.
Remove the ignition switch.
^
Disconnect the electrical connector.
^
Depress the 2 clips.
Installation
