landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Ride Height Sensor, Suspension Control > < Upper Accelerometer
Page 1
background image

Acceleration Sensor: Service and Repair
Lower Accelerometer

Lower Accelerometer

Service Repair No - 60.60.03 

Special Service Tools 

Removal 

1. Disconnect the battery ground cable.

2. WARNING:  Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. 

Raise and support the vehicle.

3. CAUTION:  The accelerometer is an extremely delicate component and can easily be rendered unserviceable. Never use an accelerometer

which has been dropped or subjected to mistreatment of any type. 

Remove the lower accelerometer.
^

Using the special tool, release the accelerometer.

^

Release and disconnect the electrical connector.

Installation 

1. Using the special tool, install the lower accelerometer.

^

Connect and secure the electrical connector.

2. Connect the battery ground cable.
3. Using T4, calibrate the dynamic response system.

Ride Height Sensor, Suspension Control > < Upper Accelerometer