Range Rover Sport (LS) V8-4.4L (2009)
^
Install a new nut and tighten to 22 Nm (16 lb.ft).
^
Remove the container.
4. Secure the valve block to rear stabilizer bar actuator pipe assembly mounting.
^
Install the bracket.
^
Install the nut and bolt and tighten to 9 Nm (7 lb.ft).
5. Secure the valve block to rear stabilizer bar actuator pipe assembly mountings.
^
Tighten the nut to 9 Nm (7 lb.ft)
6. Using T4, bleed the Dynamic Response system.