Range Rover Sport (LS) V8-4.4L (2009)
2. Install the shock absorber and air spring assembly.
^
Make sure the shock absorber and air spring assembly top mounting to body mating faces are clean.
^
Connect the air line into the Voss connector.
^
Fit the nuts and tighten to 63 Nm (46 ft. lbs.).
^
Pull on the air line to make sure it is fully installed into the Voss connector.
3. Secure the heat shield.
^
Install the nut and two bolts and tighten to 10 Nm (7 ft. lbs.).
4. Connect the shock absorber and air spring assembly to the lower arm.
^
Tighten the nut and bolt to 300 Nm (221 ft. lbs.).
5. Using T4, pressurize the air suspension.
6. Install the fender splash shield.