Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1244002.png)
Remove the selector shaft seal.
^
Install 307-509-1 to the seal.
^
Install 307-509-2 to 307-509-1 and extract the seal.
Installation
1. Using 307-509-3, install the selector shaft seal.
^
Clean the components.
2. Install the selector cable and bracket.
^
Secure with the clip.
^
Tighten the nut to 12 Nm (9 lb.ft).
3. Install the transmission heat shield.
^
Install the bolts.
4. Install the exhaust system.
