Range Rover Sport (LS) V8-5.0L SC (2010)
Cylinder Block Assembly: Customer Interest
Engine - Oil Leak From Rear Of Engine
TECHNICAL BULLETIN
NO: LTB00283 (ISSUE 2)
10 AUG 2010
ISSUE '2' CHANGES ARE HIGHLIGHTED IN GRAY
SECTION: 303
Oil Leak From Rear of Engine
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
An oil leak from the rear of the engine may be evident. This leak may be caused by a porosity oil leak from the high pressure gallery on the rear of the
engine block.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to repair the engine pocket porosity.
PARTS:
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times and prices are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time. Claim only the actual cost of the locally-sourced part using code 'ZZZ001'.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
ENGINE POCKET OIL LEAK REPAIR
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > Model > Service Information > Model Year > Workshop Manual
1. Refer to Workshop Manual (GTR) section 303-01B / 303-01C, Flexplate (12.53.13), and remove the flexplate.
NOTE: