Range Rover Sport (LS) V8-5.0L SC (2010)
2. Turn ignition ON (engine not running).
NOTE:
IDS must be loaded with IDS-DVD123_V7.08 or later and Calibration File 56 or later.
3. Connect the IDS to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
5. From the Session Type selection screen, choose 'Diagnosis'.
6. Select the Selected Symptoms tab, and then select:
^
Electrical > Instruments > Gauges > Exterior temperature gauge
7. Select 'continue'.
8. Select the Recommendations tab.
9. From the Recommendations window, select Run to configure the Instrument cluster control module
^
Follow all on-screen instructions to complete this task.
10. Exit the current session.
11. Disconnect the IDS and the Midtronics Vehicle Power Supply from the vehicle.