Range Rover Sport (LS) V8-5.0L SC (2010)
NOTE:
Ensure the Navigation Update Tool is available.
Refer to the Navigation Update Tool User Guide (InfoTrail > Bulletins / Publications > Technical Library) for set up and usage details.
1. Connect the Land Rover-approved Midtronics Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with IDS-DVD122_V6.04 or later and Calibration File 45 or later.
2. Connect the IDS to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
3. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
4. From the Session Type selection screen, choose 'Diagnosis'.
5. Select the Selected Symptoms tab, and then select:
^
Electrical > Information and entertainment system > Entertainment system
6. Select 'continue'.
7. Select the 'Recommendations' tab.
8. From the Recommendations tab, select Run to configure the 'Audio front control module'
^
Follow all on-screen instructions to complete this task.
UPDATE THE FRONT ENTERTAINMENT CONTROL MODULE SOFTWARE
NOTE:
Ensure the Navigation Update Tool is available.
1. From the Recommendations tab, select Run to configure the Front entertainment control module.
^
Follow all on-screen instructions to complete set up of the Navigation Update Tool and configuration the Front entertainment control module.
NOTE:
Steps 2 -22 are required as part of this module software update process.
NOTE:
Steps 2 - 4: LR4 / Range Rover Sport only
2. Remove the lower trim panel. (Figure 1)