Range Rover Classic
CRUISE CONTROL - V8i
1
REPAIR
BRAKE AND CLUTCH PEDAL SWITCHES/VENT
VALVES
Service repair no - 19.75.34 - Clutch Switch
Service repair no - 19.75.35 - Brake Switch
Remove
1. Remove lower dash panel.
2. Disconnect electrical multi-plug from pedal
switch.
3. Pull vent hose from switch.
4. Release switch/vent valve from bracket.
Refit
5. Reverse removal procedure.
NOTE: The switch/vent valve is factory set
and does not require adjustment in
service.
MAIN CONTROL SWITCH
Service repair no - 19.75.30
Switch Replacement
Remove
1. Disconnect battery negative lead.
2. Carefully release lower edge of panel from
surround, withdraw panel.
3. Noting their fitted positions, disconnect
multiplugs from switches.
4. Depress retaining lugs on switches, remove
switches from panel.
Bulb replacement
5. Identify bulb to be replaced and remove
appropriate switch.
6. Rotate bulb holder 90 deg. and withdraw it from
switch.
Refit
7. Reverse removal procedure.
