ES 250 V6-2.5L (2VZ-FE) (1991)
3.
Remove the steel backing plates from the rubber inserts.
Note
The backing plates are to be reused unless damaged.
4.
Install the backing plates on the new rubber inserts.
Note
The backing plates are slightly curved. Check and install the backing plates according to the illustration. Driver side and passenger side backing
plates are oriented differently
5.
Install the rubber inserts, with the backing plates, onto the wiper frame.
6.
Install the wiper frame on the wiper arm.
Note
Be sure to install the head (big end) of the insert toward the bottom as shown.
WARRANTY INFORMATION:*