ES 300 V6-3.0L (3VZ-FE) (1992)
19. INSTALL SPEAKER
(a) Connect the connector.
(b) Install the speaker with three screws.
20. INSTALL DOOR TRIM
(a) Install courtesy light.
(b) Install the armrest base panel with three screws.
(c) Install the speaker grill with three screws.
(d) Install the door pocket with ten screws.
(e) Install the side ventilator duct with four screws.
(f) Insert the upper edge of the trim from above, tap the trim by hand fix it in place with the clips, then connect the connectors.
(g) Install two clips.
(h) Install two screws and the cap.
(i) Install the armrest cover.
21. INSTALL DOOR INSIDE HANDLE BEZEL
Install the door inside handle bezel.