ES 300 V6-3.0L (3VZ-FE) (1992)
Brake Fluid Pump: Service and Repair
TRAC Pump Assembly
REMOVAL AND INSTALLATION OF TRAC PUMP ASSEMBLY
Remove and install the part as shown.
(MAIN POINT OF REMOVAL AND INSTALLATION)
1. DRAIN OUT HIGH PRESSURE FLUID
(a) Remove the air cleaner.
(b) Connect a vinyl tube to the TRAC actuator bleeder plug, then loosen the bleeder plug.
(c) When the fluid has flowed out, tighten the bleeder plug.
CAUTION: Since the fluid is under high pressure, it could spray out with great force, so be careful.