ES 300 V6-3.0L (3VZ-FE) (1992)
6. Remove alternator drive belt.
Loosen the pivot bolt and adjusting lock bolt. and remove the drive belt.
7. Remove RH front wheel.
8. Remove RH fender apron seal.
9. Remove PS drive belt.
Loosen the two bolts, and remove the drive belt.
10. Slightly jack up engine.
Raise the engine enough to remove the weight from the engine mounting on the right side.
11. Remove engine moving control rod.
Remove the three bolts and control rod.
12. Disconnect connector from ground wire on RH fender apron.