ES 300 V6-3.0L (3VZ-FE) (1992)
Heater Core: Service and Repair
Fig. 29 Removing Heater Protector
Fig. 30 Removing Heater Core Mounting Brackets
1.
Disconnect battery ground cable and disable airbag system as described under MAINTENANCE PROCEDURE/AIRBAG SYSTEM
DISARMING.
2.
Drain coolant from engine and radiator, then disconnect heater hoses from heater core inlet and outlet.
3.
Remove two retaining clips and heater protector, Fig. 29.
4.
Remove three screws and three retaining clamps, Fig. 30.
5.
Pull heater core from case.
6.
Reverse procedure to install.