ES 300 V6-3.0L (3VZ-FE) (1992)
/Page-190003.png)
(b) Align the knock pin hole of the camshaft with the knock pin groove of the timing pulley as shown.
(c) Install the knock pin.
(d) Using SST. install and torque the bolt. SST 09278-54012
Torque: 108 Nm (1,100 kgf-cm, 80 ft-lb)
9. Set No.1 cylinder to TDC/Compression.
(a) (Crankshaft Position)
Turn the crankshaft pulley, and align its groove with the "0", timing mark of the No.1 timing bell cover.
