ES 300 V6-3.0L (3VZ-FE) (1992)
Fuel Injector: Service and Repair
Installation
O-ring Installation
1.
INSTALL INJECTORS TO DELIVERY PIPES
(a)
Install two new grommets to the injector.
(b)
Apply a light coat of gasoline to two new o-rings and install them to the injector.
(c)
While turning the injector left and right, install into delivery pipes. Install the six injectors.
Spacers And Insulators
2.
INSTALL RH DELIVERY PIPE AND INJECTORS
(a)
Place the two spacers in position on the intake manifold.
Clean the injector holes before installing the injectors into the intake manifold.
Injector Connector Orientation