ES 300 V6-3.0L (3VZ-FE) (1992)
Air Bag Control Module: Description and Operation
The connectors to the center airbag sensor assembly should be connected or disconnected with the sensor mounted on the floor. If the connectors are
connected or disconnected while the center airbag sensor assembly is not mounted to the floor, it could cause undesired ignition of the airbag system.
The center airbag sensor assembly contains mercury, after replacement or service, do not destroy old part, dispose of as toxic waste. Do not disassemble
center airbag sensor assembly. When disconnecting sensor assembly electrical connectors, ensure assembly is properly mounted to floor or accidental
airbag deployment may occur.