ES 300 V6-3.0L (3VZ-FE) (1992)
Ignition Switch: Service and Repair
Fig. 15 Ignition Switch Location
1.
Disconnect battery ground cable and disable airbag system as described under MAINTENANCE PROCEDURE/AIRBAG SYSTEM
DISARMING.
2.
Remove steering column as described under STEERING SUSPENSION CHASSIS BODY COMPONENTS/STEERING/COMPONENT
REPLACEMENT AND REPAIR/STEERING COLUMN.
3.
Disconnect ignition switch connector.
4.
Remove screws and ignition switch from key cylinder and wire harness clamp, Fig. 15.
5.
Reverse procedure to install.