ES 300 V6-3.0L (3VZ-FE) (1992)
(b)
Tighten the fourteen bolts in the upper valve body. Bolt Torque 6.6 Nm (67 kgf cm, 58 in lb).
13.
INSTALL B(0) ACCUMULATOR
(a)
Place the check ball on No. 1 gasket.
(b)
Install the B0 accumulator assembly.
(c)
Install and torque the two bolts. Bolt Torque 6.6 Nm (67 kgf cm, 58 in lb)
14.
INSTALL SOLENOIDS
(a)
Coat the 0-rings with ATF and install them to the solenoids.
(b)
install the lockup solenoid.
(c)
Install and torque the bolt. Each bolt length mm (in.) is indicated in the figure. Bolt Torque 6.6 Nm (67 kg cm, 58 in lb).
(d)
Install No. 1 and No. 2 solenoids.