ES 300 V6-3.0L (3VZ-FE) (1992)
5. REMOVE OIL STRAINER AND APPLY TUBE BRACKET
(a) Remove the three bolts and the oil strainer.
NOTICE: Be careful as shown oil will come out with the strainer.
(b) Remove the two bolts and the apply tube bracket.
6. REMOVE OIL TUBES
Pry up both tube ends with a large screwdriver and remove the seven tubes.
7. DISCONNECT SOLENOID CONNECTORS
8. REMOVE MANUAL VALVE BODY
(a) Remove the two bolts and detent spring.