ES 300 V6-3.0L (3VZ-FE) (1992)
NOTICE: Do not damage the oil seal lip.
-
Using pliers, install a new snap ring.
-
Install a new bearing lock bolt and tighten it.
Torque: 32 N.m (330 kgf.cm, 24 ft.lbf)
4. CONNECT DRIVE SHAFT TO AXLE HUB Install the outboard joint side of the drive shaft to the axle hub.
NOTICE: Do not damage the boot.
5. CONNECT STEERING KNUCKLE TO LOWER ARM
Torque: 127 N.m (1,300 kgf.cm, 94 ft.lbf)
6. TIGHTEN SIX HEXAGON BOLTS
-
Using SST, tighten the six hexagon bolts while depressing the brake pedal.
SST 09043-88010
Torque: 65 N.m (660 kgf.cm, 48 ft.lbf)