ES 330 V6-3.3L (3MZ-FE) (2004)
SST 09950-00020
23. REMOVE FRONT DRIVE SHAFT BEARING
a. Using a snap ring expander, remove the front drive shaft hole snap ring RH.
b. Using SST and a press, remove the bearing.
SST 09527-10011
NOTICE: Be careful not to drop the inboard joint assy.
24. INSTALL FRONT DRIVE SHAFT BEARING
a. Using SST and a steel plate, install a new front drive shaft bearing.
SST 09527-30010, 09527-10011
NOTICE: Bearing should be completely installed.
b. Using a snap ring expander, install a new front drive shaft hole snap ring RH.