ES 350 V6-3.5L (2GR-FE) (2007)
/Page-1589002.png)
a. Apply protective tape to the area given in the illustration.
b. Using a molding remover, disengage the 4 clips and remove the No. 1 speaker hole cover.
2. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
a. Remove the 2 bolts.
b. Lift the front stereo component speaker assembly and disconnect the connector to remove the stereo component speaker assembly.
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
1. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY
