ES 350 V6-3.5L (2GR-FE) (2007)
Speaker: Testing and Inspection
Rear Center Speaker
ON-VEHICLE INSPECTION
1. INSPECT STEREO COMPONENT SPEAKER
HINT: Remove interior parts so that the stereo component speaker can be seen.
a. Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the stereo component speaker.
b. Visually check the speaker.
OK: The cone paper of the speaker is not torn.
If the result is not as specified, replace the stereo component speaker.
c. Speaker resistance check
1. Disconnect the stereo component speaker connector.
2. Measure the resistance between the terminals of the speaker.
NOTE: The speaker should not be removed for checking.
If the result is not as specified, replace the stereo component speaker.
2. INSPECT REAR HEADER SPEAKER
HINT: Remove interior parts so that the rear header speaker can be seen.
a. Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the rear header speaker.
b. Visually check the speaker.