ES 350 V6-3.5L (2GR-FE) (2007)
B.
Tape and cover the drill bit 5 mm from the tip. Use the tape as a drill depth guide.
C.
Free the flange of head of each rivet by drilling to the 5 mm point on the bit.
D.
Remove each of the 8 rivets.
E.
Disengage the clip and guide and remove the front door outside molding from the door frame.
Installation Procedure
1.
Install front door outside molding.
A.
Engage the molding guide into the door frame.
B.
Engage the clip and install the front door outside molding to the door frame.