ES 350 V6-3.5L (2GR-FE) (2007)
b. Connect the hood lock control cable and connector.
c. Install the hood lock assembly with the 2 bolts and nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
d. Install a new hood lock nut cap.
4. INSPECT HOOD SUB-ASSEMBLY
5. ADJUST HOOD SUB-ASSEMBLY
6. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
7. INSTALL FRONT FENDER LINER
a. Install the front fender liner with the 2 bolts.
b. Install the 5 screws and 6 clips.
8. INSTALL FRONT BUMPER ASSEMBLY
9. INSTALL FRONT WHEEL OPENING EXTENSION PAD