ES 350 V6-3.5L (2GR-FE) (2007)
NOTICE: Securely apply the double-sided tape to prevent the tape from being out of alignment and peeling off.
b. Peel off the release paper from the double-sided tape.
c. Attach the No. 1 roof wire along the double-sided tape so that the marking surface of the wire harness faces downward.
NOTICE:
-
Securely attach the No. 1 roof wire.
-
Failure to do so may cause abnormal noise.
d. Turn the visor connectors clockwise approximately 90° to the connectors of the roof headlining.
e. Apply adhesive tape to the locations shown in the illustration.