ES 350 V6-3.5L (2GR-FE) (2007)
HINT: As shown at point A in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining
assembly.
3. INSTALL VANITY LIGHT ASSEMBLY
a. Install the vanity light to the roof headlining.
b. Connect the 2 claws to install the bulb holder.
HINT: Use the same procedure to install the light on the other side.
4. INSTALL ANTENNA CORD SUB-ASSEMBLY
5. INSTALL ROOF HEADLINING ASSEMBLY (for Standard)