ES 350 V6-3.5L (2GR-FE) (2007)
Wipe off any tape adhesive residue with cleaner.
C.
Remove the release paper from the new front door window frame molding.
NOTE
After removing the release paper; keep the exposed adhesive free from foreign matter.
D.
Engage the clip and install the front door window frame molding.
E.
Firmly press on the molding making sure it properly adheres to the door.
4.
Install front door glass run.
Ensure that the glass run fits tightly into the door frame.
5.
Install the front door upper portion of the weatherstrip.
A.
Ensure that the double sided tape adheres to the lower portion of the outer molding assembly and the weatherstrip fits tightly back into
position.
B.
Clip in the upper back corner of the weatherstrip.