ES 350 V6-3.5L (2GR-FE) (2007)
1. REMOVE STOP LIGHT SWITCH ASSEMBLY
(a)
Turn the stop light switch assembly and remove it as shown in the illustration.
2. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
(a)
Remove the stop light switch mounting adjuster from the brake pedal support assembly.
3. REMOVE BRAKE PEDAL SUB-ASSEMBLY
(a)
Remove the bolt and the nut.
(b) Remove the 2 brake pedal bushings, the brake pedal shaft collar, and the brake pedal subassembly.
4. REMOVE BRAKE PEDAL PAD
(a)
Remove the brake pedal pad.
REASSEMBLY
1. INSTALL BRAKE PEDAL PAD
(a)
Install brake pedal pad.
2. INSTALL BRAKE PEDAL SUB-ASSEMBLY
(a)
Apply lithium soap base glycol grease to 2 new brake pedal bushings.
(b) Install the brake pedal sub-assembly, the 2 brake pedal bushings, and the brake pedal shaft collar to the brake pedal support assembly with the
bolt and the nut as shown in the illustration.
Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf)
3. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
(a)
Install the stop light switch mounting adjuster.