ES 350 V6-3.5L (2GR-FE) (2007)
c.
Apply a small amount of the disc brake grease (1 - 2 mm [0.04-0.08 in.] thick) to the areas shown in the illustration.
NOTE:
Do NOT apply grease to the friction surfaces of the brake pads or the disc rotor.
J.
Install the 2 rear disc brake pads with anti-squeal shim kit.
K.
Install the rear disc brake caliper assembly with the 2 bolts.
Torque: 62 N.m (630 kgf.cm, 46 ft.lbf)
NOTE:
Do NOT twist the brake hose when installing the rear disc brake caliper assemblies.
L.
Install the rear wheel.
3.
Road test the vehicle to confirm the condition has been corrected.