ES 350 V6-3.5L (2GR-FE) (2007)
Apply a small amount of the disc brake grease (1 - 2 mm [0.04 - 0.08 in.] thick) to the areas shown in the illustration.
NOTE:
Do NOT apply grease to the friction surfaces of the brake pads or the disc rotor.
J.
Install the 2 anti-squeal springs, if equipped.
K.
Install the disc brake cylinder assembly with the 2 bolts.
Torque: 34 N.m (350 kgf.cm, 25 ft.lbf)
L.
Install the front wheel.
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
3.
Road test the vehicle to confirm the front brake "squeak" noise is NO longer present.