ES 350 V6-3.5L (2GR-FE) (2007)
/Page-1115005.png)
(c)
Remove the 2 nuts, the front brake tube way, the O-ring and the brake master cylinder sub-assembly.
INSTALLATION
1. INSTALL BRAKE MASTER CYLINDER SUBASSEMBLY
(a)
Install a new O-ring, the brake master cylinder subassembly and the front brake tube way with the 2 nuts .
Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
(b) Temporarily tighten the 6 brake lines and connect the connector.
