ES 350 V6-3.5L (2GR-FE) (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE BRAKE ACTUATOR
a. Remove the 2 nuts and the brake actuator from the brake actuator bracket assembly.
REASSEMBLY
1. INSTALL BRAKE ACTUATOR
a. Install the actuator to the brake actuator bracket assembly with the 2 nuts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
NOTE: Do not remove the hole plug before installing a new brake actuator because the brake actuator is filled with brake fluid.