ES 350 V6-3.5L (2GR-FE) (2007)
Parts Information
Inspection Procedure
^
If necessary, use an oil dye to confirm the source of the oil leak.
^
Refer to the repair procedure below ONLY if the oil leak source is located at one or both of the camshaft housings.
Repair Procedure: Disassembly
Disassemble the engine to remove the timing cover and replace the RH and LH camshaft housing sub-assemblies.
1.
Remove the engine assembly.
Refer to the Technical Information System (TIS), 2007 model year ES 350 Repair Manual, Engine/Hybrid System - Engine Mechanical - 2GR-FE
Engine Mechanical: Engine Assembly: Removal.